How do i find my ip address?

It is essential to know your IP address if you want to successfully connect to the internet. An IP address, which stands for Internet Protocol address, is a numerical label assigned to every device connected to a computer network that uses the Internet Protocol for communication. It is usually used for location identification and tracking of devices on networks, such as within a home or business LAN (Local Area Network).

Finding your IP address is relatively easy. However, the method you use will depend on which device you are using and the type of internet connection you have.

If You Are Using a Window Device:

1. Open Command Prompt: If you are using Windows 7 or earlier versions, click Start button and type "cmd" in search box and press enter. For Windows 8 and later, type "cmd" in search box after pressing Win+Q keys while on your desktop.

2. Type ipconfig /all command: This command will display all of your computer's current IP configurations, including the IP address assigned to it by your router or ISP (Internet Service Provider). Look for an entry labeled "IPv4 Address" to find your device's IP address.

3. Typeipconfig /release followed by ipconfig /renew if necessary: If the address listed for IPv4 Address is 0.0.0.0 or 169.xxx., then type ipconfig /release followed by ipconfig /renew command and then check IPv4 Address again with ipconfig /all command to get the updated one assigned by your router/ISP/network administrator (the same one that all other devices will see when they try to connect with yours).

If You Are Using an Apple Device:

1. Open System Preferences: Click on Apple icon located at the upper left corner of your desktop screen and select System Preferences shortcut from the drop down list that appears next.

2. Select Network option from top menu bar and choose an interface from left panel: Generally most Apple users will see Wi-Fi interface when connecting their device through a wireless router but if not then try selecting either Ethernet or AirPort (if available).

3 Configure TCP/IP option from right panel : Select TCP/IP tab from right side of window which should list some details related to IP configuration including IP address assigned to this device by current network connection provider or system administrator (such as home router or ISP etc.). This should be same value available under IPv4 Address in case of PCs running Windows 7/ earlier version operating system as shown above in Method 1 section above but IF it shows more than one IPv6 addresses there then not all programs support this protocol stack so far so just note down first line value labeled as IPv4 Address along with Subnet Mask under Header section and these two should be enough until specific needs arise that require IPv6 use which should be otherwise rare cases in today's world outside corporate networks etc.).

Although the steps mentioned above may appear different depending on which Operating system you are using (Windows or Mac OS), they actually do similar things behind the scenes such as accessing network information like DNS servers, Routers etc., requesting them their assigned IP addresses and other related information via issuing a special type of messages known as Requests which are designed only to get responses from them containing requested data etc., These specially designed packets can travel within same LAN boundaries via broadcast messages known as ARP requests but otherwise Rules like ICMP protocol respect Subnetting rules & Firewall configures along with any other limitations set on respective Router(s) located before target destination over internet so basically this whole process works due even after knowing final destination details anyone trying access it still has jump over these hurdles before finally reaching target hosts located over Internet clouds somewhere else near different corners of world wide web inaccessible often times throughly simply Subnetting rules too…etcetra!

See more about where is my ip